The image shown here is for illustrative purposes only.
10A SWITCHING REGULATOR ID 1031497 Document code 39-0018-0000_$2
Axonometric photo
Front side view drawing
Wiring diagram drawing
YOU MAY ALSO LIKE...
| NOMINAL CURRENT | 8.3A |
| RIPPLE DI TENSIONE | 100mV |
| TENSIONE IN USCITA | 24V |
| TENSIONE INGRESSO |
48V 80V |
| TYPE | BUCK |
| CORRENTE MASSIMA IN USCITA |
10A |
| COMMUNICATION INTERFACE | NO |
| NOMINAL POWER |
200W |
| NR OF CONTACTS | 2 PINS |
| FREQUENZA | 62kHz |
| CANBUS | NO |
| GALVANIC ISOLATION | NO |
| CONNECTORS |
AMP 0-0280542-0 IMP 120.020W |
| CABLE LENGTH |
100mm |
| PARALLELABLE | NO |
| SHORT CIRCUIT PROTECTED OUTPUT | YES. AUTOMATIC IN 5'' |
| OVERLOAD PROTECTION | YES BY BLINKING |
| REVERSE POLARITY PROTECTED | YES. BY MEANS OF INTERNAL FUSE |
| OPERATING TEMPERATURE |
-30 ÷ 45°C |
| HOUSING MATERIAL | ALUMINIUM |
| HOMOLOGATIONS |
EJ 1378 EN 12895SA |
| PROTECTION DEGREE | IP64 |
DC/DC voltage converter 1031497 with polarity reversal protection via internal fuse, overload protection via blinking, and automatic short-circuit protection in 5 seconds features an operating temperature range between -30 and 45°C. Input voltage: 48V, 80V; output voltage: 24V; nominal power: 200W; nominal current: 8.3A; maximum output current: 10A; protection rating: IP64. It is EJ 1378 and EN 12895SA approved.